While it might seem easier than it really is, drywall finish has a specific set of professional standards. We are proud to say that our experts can complete the five levels. There are a set of steps that must be followed.
You can do the job, although not everyone will be able to fulfill the requirements. This process involves sanding mud to smoothen edges. Unfortunately, this is a difficult task that requires skill. Finishers are responsible for making sure that the drywall is flat and smooth. When you hire the right person, you don’t need to worry about wall textures and uneven colors.
A drywall finish conceals joints to create a smooth surface that is seamless throughout the interior of your home. We will briefly describe the five levels standardized by the drywall/ or gypsum industry to provide more information.
Although most people think it’s a five-level process it actually has six steps. We start at level zero. Level zero drywall does not need finishing, taping, or any other accessory. This finish is only for temporary construction projects. There are no final decisions on wall decoration.
Next is level 1, which includes one coat with a tape set. Professionals apply the tape to the joint compound at all joints and on interior angles. If the project includes sound and smoke control protocols, this process can include them. Drywall level one is commonly used for plenum areas over ceilings, attics or concealed parts of the building.
Level two will require a double coat on the joining compounds. This includes all joints, interior angles and fastener heads. Next, drywall level 3 includes embedding a tape into joint compounds with an extra coating. This type of finish is often used in interior residential houses.
The drywall finish four levels has two coats. This finish is commonly used for walls with light textures or flat paints. These finish types are not recommended if you want to use semi-gloss or glossy finishes.
Last but not the least, there is the fifth level. This has a thin, stippled coat of joint compounds that runs across the entire surface. This level of drywall is considered the highest-quality finish by professionals. The industry recommends drywall finish five for any texture type, including gloss, semigloss, enamel and non-textured flat paints.